Vollrath O431B Manual do Utilizador

Model O431OPERATORS MANUALManual No. 513635 Rev.5

Owner’s Manual #513635 Rev.5 4 O431B Model Machines2.5 MIX PUMPA. MIX PUMP HOSE INSTALLATIONFollow the steps below to install the mix pump hose in t

Owner’s Manual #513635 Rev.5 5 O431B Model Machines2. Connect the free end of the tubing to the mix check valve. Observe the direction of the check

Owner’s Manual #513635 Rev.5 6 O431B Model Machines4. Repeat steps 1 to 3 for the middle port and for the right port of the mix inlet manifold.5.

Owner’s Manual #513635 Rev.5 7 O431B Model Machines3.1 OPERATOR’S SAFETY PRECAUTIONS SAFE OPERATION IS NO ACCIDENT; observe these rules:A. Know the

Owner’s Manual #513635 Rev.5 8 O431B Model MachinesC. SPIGOT SWITCHThe spigot switch is mounted to the spigot cam assembly behind the header panel.

Owner’s Manual #513635 Rev.5 9 O431B Model Machines3.3 DISASSEMBLY OF MACHINE PARTSWARNINGMoving machinery can grab, mangle and dismem-ber. Place th

Owner’s Manual #513635 Rev.5 10 O431B Model Machines3.4 CLEANING DISASSEMBLED PARTSDisassembled machine parts require complete cleaning, sanitizing

Owner’s Manual #513635 Rev.5 11 O431B Model MachinesH. Apply a thin layer of sanitary lubricant to the inside and outside of the auger support bush

Owner’s Manual #513635 Rev.5 12 O431B Model MachinesF. Using a sanitized soft bristle brush (or equivalent) dipped in sanitizing solution, clean th

Owner’s Manual #513635 Rev.5 13 O431B Model Machines28. Press the SET button to save the value. The LCD will read “CutOut Set -- OK”.29. Press the

Owner’s Manual #513635 Rev.5 14 O431B Model MachinesWhen checking the temperature, stir the thermometer in the frozen product to get an accurate rea

Owner’s Manual #513635 Rev.5 15 O431B Model Machines3.14 DISASSEMBLY AND INSPECTION OF REMOVABLE PARTSInspection of removable parts should be made w

Owner’s Manual #513635 Rev.5 16 O431B Model Machines

Owner’s Manual #513635 Rev.5 17 O431B Model Machines4.1 MACHINE ADJUSTMENTThis section is intended to provide maintenance personnel with a general u

Owner’s Manual #513635 Rev.5 18 O431B Model MachinesIMPORTANT:Before making changes to any settings, record the original values. If the setting chan

Owner’s Manual #513635 Rev.5 19 O431B Model MachinesRUN STATISTICSIn addition to dynamic readings and recorded error code details, the IntelliTec co

Owner’s Manual #513635 Rev.5 20 O431B Model MachinesOff Time (sec) Increasing this value will increase the time between freezing cycles in “Standby

Owner’s Manual #513635 Rev.5 21 O431B Model MachinesA. Turn the mix pump switch to the OFF position. Disconnect power sources/circuit breakers.B.

Owner’s Manual #513635 Rev.5 22 O431B Model MachinesG. Connect the new mix pump hose to the pickup hose adapter using the small clamp.H. Feed one

Owner’s Manual #513635 Rev.5 23 O431B Model MachinesFigure 4-4 Removing Condenser FilterC. When the tension is properly adjusted, the belt will dep

This manual provides basic information about the machine. Instructions and suggestions are given covering its operation and care.The illustrations and

Owner’s Manual #513635 Rev.5 24 O431B Model Machines

Owner’s Manual #513635 Rev.5 25 O431B Model Machines5.1 ERROR CODESWhen the machine experiences a problem, one of the following error codes will be

Owner’s Manual #513635 Rev.5 26 O431B Model MachinesError Code 5 - Freezing Cylinder Sensor The Freezing Cylinder Sensor Error (E5) indicates a fai

Owner’s Manual #513635 Rev.5 27 O431B Model Machines5.3 TROUBLESHOOTING - MACHINEPROBLEM POSSIBLE CAUSE REMEDYDrive motor (auger) “kicks-out”, or do

Owner’s Manual #513635 Rev.5 28 O431B Model Machines5.4 TROUBLESHOOTING - MIX PUMPPROBLEM POSSIBLE CAUSE REMEDYPump motor does not run.1. Power to p

Owner’s Manual #513635 Rev.5 29 O431B Model Machines5.4 TROUBLESHOOTING - MIX PUMP (CONTINUED)PROBLEM POSSIBLE CAUSE REMEDYOverrun too high.1. Mix p

Owner’s Manual #513635 Rev.5 30 O431B Model Machines

Owner’s Manual #513635 Rev.5 31 O431B Model MachinesSECTION 6REPLACEMENT PARTS Part Description Quantity 208135 Brush - 4” X 8” X 16” (Barrel)

Owner’s Manual #513635 Rev.5 32 O431B Model Machines Part Description Quantity 149003 Bushing - Front Auger Support 2 381804 Auger Flight 10

Owner’s Manual #513635 Rev.5 33 O431B Model Machines Part Number Description Quantity 264235 Clamp - Metal (1/4” ID Tubing) 8 264241 Clamp -

Safety Alert Symbol:This symbol Indicates danger, warning or caution. At-tention is required in order to avoid serious personal injury. The message th

Owner’s Manual #513635 Rev.5 34 O431B Model Machines

January 30, 2003 721-013, Rev. 0 File: Policy Manual/Warranty softserve1 WARRANTYSOFT SERVE / SHAKE FREEZERS1. Scope: Stoelting, LLC wa

TABLE OFCONTENTSSection Description Page 1 Description and Specifi cations 1.1 Description and Specifi cations ...

Section Description Page 4 Maintenance and Adjustments 4.1 Machine Adjustment ...

Owner’s Manual #513635 Rev.5 1 O431B Model Machines1.1 DESCRIPTIONThe Stoelting O431 fl oor model machine is pressure fed. The machine is equipped wi

Owner’s Manual #513635 Rev.5 2 O431B Model Machines1.2 SPECIFICATIONSModel O431BDimensions Machine with cratewidth 19-1/8’’ (48,6 cm) 27’’ (68,6 cm)

Owner’s Manual #513635 Rev.5 3 O431B Model Machines2.1 SAFETY PRECAUTIONSDo not attempt to operate the machine until the safety precautions and oper