Vollrath 59310 Manual do Operador descarregar pdf (Página 3)

Foodservice induction ranges

ENGLISH

OperatOr’s Manual

ON/OFF button. Press to turn unit on. The Power LED and the

three (3) digit DISPLAY panel will illuminate when switched on.

POWER on LED light. Illuminates when the power is switched

on. This light will blink until induction-ready cookware is

detected. Once induction cookware is detected the light will

remain on.

UP button. Used to increase the power level or time depending

upon the mode selected.

DOWN button. Used to decrease the power level or time

depending upon the mode selected and model.

DISPLAY panel. This displays the power level, temperature,

timer time or an error code, depending upon the mode selected

and the model.

POWER/TEMP button. Pushing the Power/Temp button toggles

between the three (3) LED lights and functions: Power control,

Temperature control in ºF, Temperature control in ºC.

TIMER button. Used to switch on and start the timer function.

ºC LED light. Illuminates when the temperature in being

displayed in degrees Centigrade.

ºF LED light. Illuminates when the temperature in being

displayed in degrees Fahrenheit.

adjusting the Power and temPerature

1. Press the ON/OFF button to turn on the unit.

2. Place induction-ready cookware on the range/warmer. A number will

remain “steady on” units with a DISPLAY panel. The HEATING LED will

illuminate on units with HEAT RANGE and TEMPERATURE LED lights.

3. To adjust the cooking power level from 1-20, press the up button or down

button.

4. Press the POWER/TEMP button a to choose an approximate

temperature 100°F – 400°F. Press the POWER/TEMP button a second

time to choose an approximate temperature 40°C – 210°C.

5. Press the UP button or DOWN button to increase or decrease the power/

heat level or temperature. Press the UP button or DOWN button to

increase or decrease the power/heat level or temperature.

6. Press the ON/OFF button to turn off the unit.

Activating the Timer

1. Press the TIMER button. The DISPLAY will show “1” with a ashing dot

in the lower right corner.

2. Press the UP or DOWN button to set the timer from 1 to 180 minutes.

The timer can be can only be set in full minute increments.

3. When the timer cycle is complete, the unit beeps three (3) times and will

turn off.

4. To cancel the timer, press the timer button (G) or the ON/OFF button.(A)

The timer will turn off and the unit will return to the power or temperature

mode.

oPeration

WARNING

ElectricalShockHazard.

Keep water and other liquids from entering the

inside of the unit. Liquid inside the unit could cause

an electrical shock.

If liquid spills or boils over onto the unit, immediately unplug the unit

and remove cookware. Wipe up any liquid with a padded cloth.

3. Place the induction-ready cookware containing food in the center

position of a heating surface.

NOTE:  

Donotpre-heatemptycookware.Becauseofthespeedand

efciencyoftheinductionrange,cookwarecanveryquickly

overheatandbedamaged.

NOTE:  

Donotdropcookingutensilsorotherobjectsontothecooking

surface.Thestrong,non-poroussurfacewillbreak.Thewarranty

doesnotcoverthistypeofabuse.

4. Press the ON/OFF button. The DISPLAY panel will show a power

level or the HEAT DISPLAY LED will light. When an induction ready

cookware pan is placed on the heating surface, the DISPLAY panel will

remain on, or the HEATING LED will illuminate. This indicates the unit

is heating.

WARNING

BurnHazard.

Do not touch cookware, heating surface, food, or

liquid while heating.

Hot food and liquids can burn skin. Induction heating surfaces heat

very rapidly. Use caution when adding pre-heated oil, liquid or other

food already in the cookware.

Units with DISPLAY panels are equipped with an “over-heating protection”

feature. If the temperature of the cooking surface becomes too hot, the unit

will turn off. The display will ash “F5” or “F6” to indicate the unit is in “over-

heating protection” mode. After the unit has cooled, turn the cooking surface

on and if “F5” or “F6” is not displayed, then cooking can resume.

The display window should remain constant during operation. If the display

is ashing, see the TROUBLESHOOTING section in this manual.

Removing cookware from the cooking surface for more than ten minutes will

cause the unit to automatically turn off. Removing cookware for less than

ten minutes will not interrupt operation of the unit.

All units will start in Power Mode when turned on rst time.

Power

Figure1.FeaturesandControlsClampBaseModel.

1 2 3 4 5 6 7 8

Comentários a estes Manuais

Sem comentários

Vollrath 59310 Manual do Operador Página 3

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Vollrath 59310